Clogging processes caused by biofilms growth and organic particles accumulation in lab-scale vertical flow constructed wetlands

The accumulation of organic matter in substratum pores is regarded as an important factor causing clogging in the subsurface flow constructed wetlands.In this study,the developing process of clogging separately caused by biofilm growth and organic particles accumulation instead of total organic matter accumulation was investigated in two groups of lab-scale vertical flow constructed wetlands (VFCWs) fed with glucose (dissolved organic matter) and starch (particulate organic matter) influent.Results showed that the growth of biofilms within the substratum pores certainly caused remarkable reduction of effective porosity,especially for the strong organic wastewater,whereas its influence on infiltration rate was negligible.It was implied that the most important contribution of biofilm growth to clogging is accelerating the occurrence of clogging.In comparison with biofilm growth,particles accumulation within pores could rapidly reduce infiltration rate besides effective porosity and the clogging occurred in the upper 0-15 cm layer.With approximately equal amount of accumulated organic matter,the effective porosity of the clogged layer in starch-fed systems was far less than that of glucose-fed systems,which indicated that composition and accumulation mode of the accumulated organic matter played an important role in causing clogging besides the amount.According to the results,some related methods to prevent and recover the clogging phenomenon were suggested.     

基于地统计学的北京市可吸入颗粒物时空变异性及气象因素分析

大气颗粒物是造成城市空气污染的重要原因之一,并已经成为我国北京等大中城市空气污染中的首要污染物.为分析北京市采暖期大气中可吸入颗粒物的污染水平及其气象因素的影响作用,以大气可吸入颗粒物PM0.3,PM3.0,PM5.0为研究对象,于2007～2009年采暖期间在北京市城区设立了93个采样点进行定点采样监测,利用地统计分析工具和指示克里格方法,模拟分析了北京市城区2007～2009年采暖期PM0.3、PM3.0、PM5.0的时空变异性,并建立起可吸入颗粒物浓度与气象条件(风力、温度、湿度)的对应关系,由此分析气象因素对大气颗粒物污染水平的影响程度.结果表明:实验半变异函数符合具有块金值的球状模型;北京城区空气可吸入颗粒物的污染水平自2007年以来污染程度与污染面积均呈减小趋势,影响范围主要集中在西南部,西北次之,近郊区污染重于城区;气象条件是影响可吸入颗粒物污染程度的重要因素,在不同年份不同气象因子对颗粒物的影响是不同的.但另一方面,由于污染原因季节冷暖程度的不同,气象条件对颗粒物浓度的影响有不确定的一面,但仍可找到一些规律.     

堆肥嗜热纤维素分解菌的筛选鉴定及其强化堆肥研究

对采集于农业堆肥高温期的微生物样品进行30d的高温驯化,驯化完成后从中筛选得到15株嗜热纤维素分解菌,经形态学特征、生理生化反应及16S rDNA序列同源性比对鉴定为:Bacillus sp3株,Paenibacillus sp1株,Bacillus licheniformis3株,Bacillus subtilis4株,Brevibacillus borstelensis1株,Bacillus coagulans3株.将筛选得到的菌种添加至高纤维素含量的堆体进行效果验证,结果表明添加嗜热纤维素分解菌对堆肥pH变化无显著影响,但可提高堆肥高温期温度、延长高温期并显著地降低堆肥产品的C/N和有机质含量,显著降低纤维素和半纤维素含量,加快堆肥腐熟.堆体有机质降解动力学结果表明,堆体接菌和不接菌处理的有机质最大降解度分别为62.5481%和61.7101%,速率常数分别为0.1250d-1和0.1051d-1,接菌处理的堆肥比对照堆肥提前6d达到稳定.研究表明,添加筛选的嗜热纤维素分解菌能缩短堆肥周期.     

悬浮液进样-AAS法测定TSP中锌、铅和铁的含量

用浓硝酸和高氯酸混酸体系在超声波作用下消解滤膜,加入稳定剂琼脂,用超声波震荡15min制成悬浮液,用火焰原子吸收光谱法测定TSP中的锌、铅和铁的含量,并以传统浓HNO3-H2O2湿法消解-原子吸收光谱法的测定结果为参考对测定值进行t检验,结果表明:RSD≤3.27%(n=6),两种方法的相对误差<±0.85%,且两种方法无显著性差异,说明悬浮液进样法的测定结果准确、可靠。     

蒸汽相变促进WFGD系统脱除PM_(2.5)的协同作用分析

蒸汽相变作为预处理措施能显著提高常规除尘设备对PM2.5细颗粒的脱除效率,但对于水汽含量低的原始燃煤烟气蒸汽耗量太大,限制了工程应用,而在燃煤电厂湿法烟气脱硫(WFGD)过程中,烟气降温增湿,再添加少量蒸汽就可以建立PM2.5凝结长大所需要的过饱和环境,进而实现WFGD系统对PM2.5的协同高效脱除。在分析蒸汽相变促进PM2.5脱除影响因素的基础上,结合湿法脱硫过程传热传质特性,定性分析了脱硫塔塔前、塔内和塔出口添加蒸汽对WFGD系统脱除PM2.5的促进作用,并提出具体工艺方案。     

ICP-AES测定南宁市大气颗粒物中重金属含量

采用石英滤纸和隔膜真空泵自制采样装置,对南宁市区的居民区、校园区、商业区和工业区进行连续10d的大气采样,所得样品经微波消解后,用电感耦合等离子体发射光谱法(ICP-AES)同时测定铬、铁、铜、锌、砷、镉和铅七种重金属元素含量以检测南宁市空气质量,同时考察了仪器工作参数对测定结果的影响。实验表明:在选定的实验条件下,各元素的检出限低,准确性和精密度良好。样品测定结果表明,大气环境中重金属污染物以Fe、Zn和Pb为主;工业区,商业区,居民区重金属含量高于校园区。重金属平均浓度最大值为:Cr(0.06027μg/m)3、Fe(1.8541μg/m)3、Cu(0.02214μg/m)3、Zn(0.3666μg/m)3、As(0.02272μg/m)3、Cd(0.004733μg/m)3、Pb(0.1843μg/m)3,低于我国(TJ36-96)《居住区大气中的有害物质最高容许量》中规定值,说明南宁市空气质量良好。     

失效锂离子电池有机物真空脱除和浸出研究

文章采用真空蒸发热处理的方法脱除废弃失效的锂离子电池中的有机物,加热温度为220~500℃,真空炉内压力150Pa,恒温处理时间1h。除有机物被脱除外,当处理温度为280℃时形成了CoO和Li2CO3。温度升高至350℃时,主要的物相为LiCoO2、CoO、Co3O4和Co,以及少量Li2CO3。在超声场中将电极材料与铝、铜箔集流体分离,然后分别用含亚硫酸钠的硫酸溶液和氨性溶液处理电极材料。当用含亚硫酸钠的硫酸溶液浸出经280℃脱除有机物的电极材料时,钴元素基本被浸出。而用氨性溶液浸出经350℃脱除有机物的电极材料时,钴元素的浸出率很低。为了提高钴的浸出率,真空热处理的温度应介于280~350℃之间。     

物元模型在综合评价旅游环境承载力中的应用

为了解决评价因素间的不确定性和不相容性问题,采用一种新方法对旅游环境承载力进行综合评价,该方法称为物元分析法。通过建立旅游环境承载力评价标准体系和物元模型来确定一个旅游区的环境承载力状态。以安徽省旅游区为例进行评价,结果表明该方法简单可行。对旅游规划决策和区域旅游业的可持续发展有重要的意义。     

上海城区和临安本底站PM_(2.5)的物化特征及来源解析

2008年4月在上海城区(徐家汇)和浙江临安大气污染本底站2个地区同步采集PM2.5样品,利用场发射扫描电镜(FESEM/EDS)和同步辐射相关技术对两地PM2.5的微观形貌、化学元素组成及来源,以及重金属元素Zn的价态进行了分析.结果表明,徐家汇、临安的PM2.5平均质量浓度分别为(131.6±65.2),(83.5±22.9)μg/m3.徐家汇地区PM2.5主要由烟尘、飞灰、矿物质等组成;临安地区PM2.5中主要为不规则形貌颗粒物.上海城区PM2.5中重金属元素的浓度明显高于临安地区样品.同步辐射X射线吸收近边结构谱的结果显示,两地PM2.5中的Zn元素都以ZnSO4为主要存在形式.富集因子法分析19种元素中,除K、Ca外,其他元素在PM2.5中富集程度上海均高于临安地区.     

Diurnal variations of polycyclic aromatic hydrocarbons associated with PM2:5 in Shanghai, China

Forty-eight daily time interval PM2:5 samples were collected from December 2006 to January 2008 in an urban site in Shanghai, China. Concentrations and compositions of polycyclic aromatic hydrocarbons (PAHs) were analyzed with GC-MS to study the diurnal and seasonal variations and to identify the main emitting sources. The diurnal variation of the PAHs concentrations was greater in the late autumn and winter sampling days, and was greatly influenced by meteorological conditions such as wind speed and ambient temperature. The concentration of PAHs in the mornings (6:30–10:00) increased distinctly, and was high in the late autumn and winter sampling days, indicating the contribution from vehicle emissions during rush hours. The diurnal variation of the high molecular weight PAHs did not seem to be controlled by the shift of gas-particle partitioning due to temperature variation, instead, it could be indicative of the variation in the source. Statistical analyses showed that the concentrations of PAHs were negatively correlated with temperature and wind speed, and positively correlated with relative humidity. Diagnostic ratios of PAHs suggested mixed emission sources of petroleum and coal/biomass combustion for PAHs in the PM2:5 in Shanghai.